Inertial Labs Kernel-100 MEMS IMU

Inertial Labs DTS-Kernel-100 Digital Tilt Sensor

Manufacturer: | Categories: ,

The DTS-Kernel-100 from Inertial Labs is a compact, self-contained strapdown industrial-grade inertial measurement system that measures linear acceleration and angular rates with three-axis MEMS accelerometers and three-axis MEMS gyroscopes.

REQUEST PRICING

Overview

Fully calibrated, temperature compensated, mathematically aligned to an orthogonal coordinate system, the DTS-Kernel-100 MEMS IMU from Inertial Labs contains up to 2 deg/hr bias in-run stability gyroscopes and 10 μg bias in-run stability accelerometers with extremely low noise and high repeatability.

The DTS-Kernel-100 is a breakthrough, fully-integrated inertial solution which combines the newest MEMS sensor technologies. This seamless integration allows Inertial Labs to provide an inertial system with top-of-the line performance while maintaining a high value price point. With its compact design and low power consumption, the DTS-Kernel-100 is easy to integrate in a wide range of higher order systems while consuming very little space and power.

With continuous Built-in Test (BIT), configurable communications protocols, electromagnetic interference (EMI) protection and flexible input power requirements, the DTS-Kernel-100 is built to be used in a wide variety of environments and integrated system applications. Angular rates and accelerations are determined with low noise and very good repeatability for both motionless and dynamic applications.

Built to be used in air, marine, and land environments, the DTS-Kernel-100 can be integrated into Motion Reference Units (MRU), Attitude and Heading Reference Systems (AHRS) and GPS-Aided Inertial Navigation Systems (INS). As a result, the DTS-Kernel-100 is ideal for a wide variety of applications such as autonomous vehicles, antenna and line of sight stabilizations systems, and buoy or boat motion monitoring.

Continuous Built-in Test (BIT), configurable communications protocols, electromagnetic interference (EMI) protection, and flexible input power requirements make the Inertial Labs DTS-Kernel-100 digital tilt sensor easy to use in a wide range of higher order integrated system applications.

Features

  • Affordable
  • ITAR free
  • Full temperature calibration of all sensing elements
  • Advanced, extendable, embedded Kalman Filter
  • Data rate of up to 2000 Hz

Applications

  • Autonomous vehicles
  • Antenna and Line of Sight Stabilization Systems
  • Passengers trains acceleration / deceleration and jerking systems
  • Motion Reference Units (MRU) and Motion Control Sensors (MCS)
  • Gimbals, EOC/IR, platforms orientation and stabilization
  • GPS-Aided Inertial Navigation Systems (INS)
  • Attitude and Heading Reference Systems (AHRS)
  • Land vehicles navigation and motion analysis
  • Buoy or Racing Boat Motion Monitoring
  • UAV & AUV/ROV navigation and control

Technical Specifications

Gyroscopes
Bias In-Run Stability:2 °/hr (RMS)
Noise:0.38 °/√hr (AWR)
Accelerometers
Bias In-Run Stability:0.01 mg (RMS, 8g)
SF Accuracy:500 ppm (over temp. range)
Pitch & Roll
Accuracy:0.05 ° (Static, RMS)
Physical
Size:26 mm x 19 mm x 8 mm
Weight:7 g
Supply Voltage:4 – 15 VDC
Power Consumption:0.365 W @ 5V
Environmental
Mechanical Shock:MIL-STD-810, 1500 g
Vibration:MIL-STD-810G, 8, 10 g – 2000 Hz
Operating Temperature:-40 °C to +85 °C
Storage Temperature:-50 °C to +90 °C

Video

Ordering

The DTS-Kernel-100 from Inertial Labs is available through Canal Geomatics. If you would like more information about this product, please feel free to get in touch with us by completing the Request Pricing form.

Canal Geomatics remains open.Learn More