Inertial Labs IMU-P MEMS IMU

Inertial Labs IMU-P Industrial MEMS IMU

Manufacturer: | Categories: ,

The IMU-P Industrial from Inertial Labs is a professional inertial measurement unit (IMU) that contains 3 ultra-high performance MEMS accelerometers and 3 highly accurate advanced MEMS gyroscopes.

REQUEST PRICING

Overview

The IMU-P Industrial from Inertial Labs is a new generation IMU that offers compact size, light weight and high performance. It is temperature calibrated within its operational temperature range to ensure tactical grade performance in a wide range of environments and applications.

This cost effective ITAR-free solution is ideal for systems requiring the high performance levels that, previously, only FOG-based IMUs could provide. Based on advanced MEMS sensors, the IMU-P Industrial measures pitch & roll, linear acceleration and angular rate. Angular rates and accelerations are measured with high accuracy for both dynamic and motionless applications.

Mathematically aligned to an orthogonal coordinate system, the IMU-P Industrial demonstrate less than 1 °/hr gyroscopes and 0.005 mg accelerometers bias in-run stability with very low noise and high reliability. Continuous built-in test, configurable communications protocols, electromagnetic interference protection, and flexible input power requirements make the IMU-P easy to use in a wide range of higher order integrated system applications.

Features

  • Affordable
  • ITAR free
  • Full temperature calibration of all sensing elements
  • Advanced, extendable, embedded Kalman Filter
  • Data rate of up to 2000 Hz
  • Environmentally sealed (IP67)

Applications

  • 3D Optical Image Stabilization
  • Computer Pointing Devices

Technical Specifications

Gyroscopes
Range:±450 deg/sec
Bias In-Run Stability:3 °/hr (RMS)
Noise – Angular Random Walk:0.3 °/√hr
Accelerometers
Range:±8 g
Bias In-Run Stability:0.01 mg (RMS, 8g)
Noise – Angular Random Walk:0.018 m/sec/√hr
SF Accuracy:500 ppm (over temp. range)
Pitch & Roll
Pitch & Roll Static Accuracy:0.05 ° (RMS)
Pitch & Roll Dynamic Accuracy:0.08 ° (RMS)
Physical
Size:39 mm x 45 mm x 22 mm
Weight:70 g
Supply Voltage:5 – 30 VDC
Power Consumption:0.8 W @ 5V
Environmental
Mechanical Shock:MIL-STD-810, 1500 g
Vibration:MIL-STD-810G, 7.5 g – 2000 Hz
Operating Temperature:-40 °C to +85 °C
Storage Temperature:-50 °C to +90 °C

Ordering

The IMU-P Industrial from Inertial Labs is available through Canal Geomatics. If you would like more information about this product, please feel free to get in touch with us by completing the Request Pricing form.

Canal Geomatics remains open.Learn More