Inertial Labs IMU-P MEMS IMU

Inertial Labs IMU-P MEMS IMU

Manufacturer: | Categories: ,

The IMU-P from Inertial Labs is a professional inertial measurement unit (IMU) that contains 3 ultra-high performance MEMS accelerometers and 3 highly accurate advanced MEMS gyroscopes.

REQUEST PRICING

Overview

The IMU-P from Inertial Labs is a new generation IMU that offers compact size, light weight and high performance. It is temperature calibrated within its operational temperature range to ensure tactical grade performance in a wide range of environments and applications.

This cost effective ITAR-free solution is ideal for systems requiring the high performance levels that, previously, only FOG-based IMUs could provide. Based on advanced MEMS sensors, the IMU-P measures pitch & roll, linear acceleration and angular rate.
Angular rates and accelerations are measured with high accuracy for both dynamic and motionless applications.

Mathematically aligned to an orthogonal coordinate system, the IMU-P demonstrate less than 1 deg/hr gyroscopes and 0.005 mg accelerometers bias in-run stability with very low noise and high reliability. Continuous built-in test, configurable communications protocols, electromagnetic interference protection, and flexible input power requirements make the IMU-P easy to use in a wide range of higher order integrated system applications.

The IMU-P comes in two variations – a Tactical version and an Industrial version.

Features

  • Affordable
  • ITAR free
  • Full temperature calibration of all sensing elements
  • Advanced, extendable, embedded Kalman Filter
  • Data rate of up to 2000 Hz
  • Environmentally sealed (IP67)

Applications

  • Passengers trains acceleration / deceleration and jerking systems
  • Antenna and Line of Sight Stabilization Systems
  • Motion Control Sensors
  • Motion Reference Units
  • GPS-Aided Inertial Navigation Systems
  • Gimbals, EOC/IR, platforms orientation and stabilization
  • Land vehicles navigation and motion analysis
  • Attitude and Heading Reference Systems
  • Buoy or Racing Boat Motion Monitoring
  • UAV & AUV/ROV navigation and control

Technical Specifications

Gyroscopes
Range:±450 deg/sec
Bias In-Run Stability:1 deg/hr (Tactical Standard A)
2 deg/hr (Tactical Stabilization S)
3 deg/hr (Industrial)
Noise – Angular Random Walk:0.2 deg/√hr (Tactical Standard A)
0.08 deg/√hr (Tactical Stabilization S)
0.3 deg/√hr (Industrial)
Accelerometers
Range:±8 g
Bias In-Run Stability:0.005 mg (Tactical Standard A)
0.01 mg (Tactical Stabilization S)
0.01 mg (Industrial)
Noise – Angular Random Walk:0.015 m/sec/√hr (Tactical Standard A)
0.018 m/sec/√hr (Tactical Stabilization S)
0.018 m/sec/√hr (Industrial)
Pitch & Roll
Pitch & Roll Static Accuracy, RMS:0.05 deg (Tactical Standard A)
0.05 deg (Tactical Stabilization S)
0.05 deg (Industrial)
Pitch & Roll Dynamic Accuracy, RMS :0.08 deg (Tactical Standard A)
0.08 deg(Tactical Stabilization S)
0.08 deg (Industrial)
Physical
Size:39 mm x 45 mm x 22 mm
Weight:70 g
Supply Voltage:5 – 30 VDC
Power Consumption:0.8 W @ 5V
Environmental
Mechanical Shock:MIL-STD-810, 1500 g
Vibration:MIL-STD-810G, 7.5 g – 2000 Hz
Operating Temperature:-40 °C to +85 °C
Storage Temperature:-50 °C to +90 °C

Ordering

The IMU-P from Inertial Labs is available through Canal Geomatics. If you would like more information about this product, please feel free to get in touch with us by completing the Request Pricing form.

Canal Geomatics remains open.Learn More