The IMU-P Tactical-A from Inertial Labs is a new generation IMU that offers compact size, light weight and high performance. It is temperature calibrated within its operational temperature range to ensure tactical grade performance in a wide range of environments and applications.
This cost effective ITAR-free solution is ideal for systems requiring the high performance levels that, previously, only FOG-based IMUs could provide. Based on advanced MEMS sensors, the IMU-P Tactical-A measures pitch & roll, linear acceleration and angular rate. Angular rates and accelerations are measured with high accuracy for both dynamic and motionless applications.
Mathematically aligned to an orthogonal coordinate system, the IMU-P Tactical-A demonstrate less than 1 °/hr gyroscopes and 0.005 mg accelerometers bias in-run stability with very low noise and high reliability. Continuous built-in test, configurable communications protocols, electromagnetic interference protection, and flexible input power requirements make the IMU-P Tactical-A easy to use in a wide range of higher order integrated system applications.
- ITAR free
- Full temperature calibration of all sensing elements
- Advanced, extendable, embedded Kalman Filter
- Data rate of up to 2000 Hz
- Environmentally sealed (IP67)
- Electrical-Optical Components (EOC/IR)
- Platform Stabilization
- Orientation Control
|Bias In-Run Stability:||1 °/hr (RMS)|
|Noise – Angular Random Walk:||0.2 °/√hr|
|Bias In-Run Stability:||0.005 mg (RMS, 8g)|
|Noise – Angular Random Walk:||0.015 m/sec/√hr|
|SF Accuracy:||150 ppm (over temp. range)|
|Pitch & Roll|
|Pitch & Roll Static Accuracy:||0.05 ° (Static, RMS)|
|Pitch & Roll Dynamic Accuracy, RMS :||0.08 °|
|Size:||39 mm x 45 mm x 22 mm|
|Supply Voltage:||5 – 30 VDC|
|Power Consumption:||0.8 W @ 5V|
|Mechanical Shock:||MIL-STD-810, 1500 g|
|Vibration:||MIL-STD-810G, 7.5 g – 2000 Hz|
|Operating Temperature:||-40 °C to +85 °C|
|Storage Temperature:||-50 °C to +90 °C|
The IMU-P Tactical-A from Inertial Labs is available through Canal Geomatics. If you would like more information about this product, please feel free to get in touch with us by completing the Request Pricing form.