Overview
The PCTEL 8117D GPS/GLONASS L1 active magnetic mount antenna is a high performance GNSS antenna with a wide voltage range, ideally suited to telematics platforms for use in vehicle mounted applications. With a wideband patch, this antenna was designed to operate at GPS L1 as well as GLONASS L1 frequencies. Using internal magnets or screw mount holes, the antenna can be installed almost anywhere on a vehicle allowing for greater flexibility.
The 8117D antenna features 28 dB gain low noise amplifier and a SAW filter. With 2.7 to 5 volt operation, the antenna can be used with the vast majority of GPS L1 and GLONASS systems available.
Features
- GPS L1 & GLONASS L1 Frequencies
- Voltage range 2.5 V – 5 V
- LNA 28 dB gain typical
- Low noise figure 1.5dB
- Other connectors supported: FAKRA C, TNC, MCX, RPTNC, and QMA but not shown
Applications
- Telematics platforms in vehicle-mounted applications
Technical Specifications
| Signal Tracking | |
| GPS: | L1 |
| GLONASS: | L1 |
| Electrical | |
| Frequency Range: | 1568-1618 MHz (typical) |
| LNA Gain: | @ 3.3 VDC: 28 dB ± 1.5 dB (typical) @ 5 VDC: 30 dB ± 1.5 dB (typical) |
| Element Gain: | 3 dBic @ 90° -2 dBic @ 20° |
| Polarization: | Right Hand Circular |
| Current Draw: | 9 mA @ 3.3 V 15 mA @ 5 V |
| DC Voltage: | 2.5-5 VDC (operating) |
| Noise Figure: | 1.5 dB (typical) |
| Mechanical & Environmental | |
| Dimensions: | 2.05 in (L) x 2.33 in (W) x 0.54 in (H) (52.1 mm x 59.2 mm x 13.6 mm) |
| Weight: | 0.26 lbs (120 g) |
| Housing Material: | ASA |
| Connector: | Male SMA standard |
| Mount: | Magnetic (5 lb lift-off force) or permanent (pre-threaded for 3 x M2.5 screws) |
| Temperature Range: | -40 °C to +85°C (operating) |
| IP Rating: | IP67 |
Ordering
The 8117D GPS/GLONASS L1 active magnetic mount antenna from PCTEL is available through Canal Geomatics. If you would like more information about this product, please feel free to get in touch with us by completing the Request Pricing form.
