The TW4027/TW4029 by Tallysman Wireless is a professional type of GNSS antenna. It operates on the frequency band for L1 GPS signals using very low power. Its low-noise amplifier requires only 2mA of minimal electricity, yet it delivers constant operations with supply voltage ranging from 2.5V to 15V. It also eliminates disturbances from Globalstar and Iridium L-Band antennas transmitting nearby.
Despite its amazing low-power consumption, noise level is excellent and nominal gain measures 21dB. Axial ratio is enhanced by 40 percent wider bandwidth than comparable units; 15 KV ESD circuit protection is provided.
Operating with a bandwidth of approximately 10MH, it tracks traditional L1 GPS and SBAS signals. TW4029 is an optional version with a “Brick-Wall” pre-filter, which eliminates saturation originating from high-level sub-harmonics as well as L-Band signals.
TW4027/TW4029 comes with three meters of cable, a variety of SMA connectors and an IP67-rated magnetic-mount enclosure.
- Extensive battery life
- Excellent signal to noise ratio
- Compliant with RoHS
- Functions reliably in harsh conditions
- Outstanding out-of-band signal rejection
- Minimal current draw
|Antenna architecture:||Single feed wideband|
|Axial ratio:||4 dB over bandwidth|
|Size:||38 mm diagonal by 14.3 mm high|
|Operating temperature:||-40 degrees C to +85 degrees C|
The TW4027 and TW4029 antennas from Tallysman are available through Canal Geomatics. Please send us your inquiry by completing the Request Pricing form if you would like more information about these antennas.