Canal Geomatics

Networking

All | Amplifiers | Attenuators | Combiners | Filters | GPS Antenna Splitters | Re-Radiating Kits

Canal Geomatics is a leading provider of network solutions from GPS Networking and Tallysman Wireless, including splitters, amplifiers, attentuators, combiners and re-radiating kits.

	Geodetics Geo-DL Wireless Data Link The compact Geodetics Geo-DL Wireless Data Link is available in a range of frequencies such as 900 MHz, 1.2 GHz and 2.4 GHz. It supports a transfer rate of 1.2Mbps or higher. Its rugged design makes it ideal for applications that are used on unmanned aerial or ground vehicles, robotics, drones, etc.
	Geodetics Geo-Pointer Heading System The compact and lightweight Geodetics Geo-Pointer Heading System, powered by Precise Instantaneous Network (PIN) positioning that is based on Geodetics' Epoch-by-Epoch instantaneous differential GPS technology, delivers real-time and accurate results.
	Geodetics Geo-ReiNAV Real-Time Relative Positioning and Orientation System The compact and lightweight Geo-ReiNAV from Geodetics Inc. is powered by Precise Instantaneous Network (PIN) positioning that is based on Geodetics' Epoch-by-Epoch technology. It offers accurate relative position and orientation between platforms that are in motion, such as unmanned aerial vehicles (UAVs), without the need of an external reference.
	Geodetics PDSU (Positioning Dismounted Soldier Unit) The Geodetics PDSU (Positioning Dismounted Soldier Unit) is a fully integrated real-time positioning system. It offers reliable and accurate results, and is well suited for military applications such as applications for tracking troop movements.
	Geodetics SAASM-RTK The Geodetics SAASM-RTK is a Selective Availability Anti-Spoofing Module (SAASM) with real-time kinematic (RTK) GPS capability. It is developed by Geodetics Inc. and Exelis, combining Geodetics' RTK technologies with Exelis SAASM.
Amplifiers
	GPS Networking - FOGPSAL Fiber Optic GPS Antenna Link The Fiber Optic GPS Antenna Link (FOGPSAL) from GPS Networking is a complete system which allows us to convert the GPS Carrier from RF to Light, transmit it up to 10 Kilometers if need be then reconvert it to RF to be received by the GPS Receiver.
	GPS Networking - LA20FPDC Filtered Line Amplifier 20 dB The LA20FPDC GPS Line amplifier is designed specifically for the GPS L1/L2 carrier frequencies. The GPS L1/L2 passband filter lowers the out of band noise and interference. The input leg takes the DC off the center conductor to power the amplifier.
	GPS Networking - LA20RPDC GPS Line Amplifier 20 dB The LA20RPDC is a 20dB gain GPS line amplifier designed specifically for the GPS L1, L2 & GLONASS carrier frequencies. The input leg takes the DC off the center conductor to power the amplifier. The DC voltage is then passed on to the intended GPS antenna.
	GPS Networking - LA25RPDC GPS Line Amplifier 25dB Gain (Pass DC) The LA25RPDC is a 25dB gain GPS line amplifier designed specifically for the GPS L1, L2 & GLONASS carrier frequencies. The input leg takes the DC off the center conductor to power the amplifier. The DC voltage is then passed on to the intended GPS antenna.
	GPS Networking - LA30RPDC GPS Line Amplifier 30dB Gain (Pass DC) The LA30RPDC is a 30dB gain GPS line amplifier designed specifically for the GPS L1, L2 & GLONASS carrier frequencies. The input leg takes the DC off the center conductor to power the amplifier. The DC voltage is then passed on to the intended GPS antenna.
	GPS Networking - LA40FPDC Filtered Line Amplifier 40 dB The LA40FPDC L1/L2 40db GPS Line Amplifier from GPS Networking passes DC voltage to the antenna and includes an L1/L2 passband filter.
	GPS Networking - MLA20RPDC Mini GPS Line Amplifier 20dB Gain Mini Housing (Pass DC) The MLA20RPDC Mini GPS Line Amplifier from GPS Networking is a one input, one output device with a 20dB min. gain block in a miniaturized housing. The frequency response covers the GPS L1 & L2 bands with excellent gain flatness.
	GPS Networking - VGLA20RPDC Variable Gain Amplifier -3 to 23dB The VGLA20RPDC Variable Gain Amplifier from GPS Networking is a one input, one output device featuring a variable gain block with 26dB of dynamic range.
	GPS Networking - VGLCDLA30RPDC GPS Variable Gain Line Amplifier 0-30 dB Gain The VGLCDLA30RPDC is a GPS Variable Gain Line Amplifier featuring a variable gain range from 0 to 30dB with an LCD display and push button controls in 1dB increments.
	GPS Source MA11M GPS Amplifier The MA11M GPS Amplifier from GPS Source is intended for military use. It is compliant to a wide range of military specifications.
	Tallysman TW120 GPS L1 25dB In-line Amplifier The TW120 by Tallysman Wireless is a rugged waterproof, low cost, low noise, low power, narrow band 25dB gain inline amplifier, specially designed to tightly filter and boost weak GPS L1 signals, while maintaining low antenna noise figures.
	Tallysman TW125 Low Current / Low Voltage 1.2 to 1.8 GHz 25dB In-line Amplifier The TW125 by Tallysman Wireless is a low cost, rugged, waterproof, low noise, low current/low voltage, 1.2 to 1.8 GHz band, 25dB gain in-line amplifier specially designed to amplify all GNSS frequency signals, from GPS L2 to GLONASS L1.
	Tallysman TW126 Mid-Power 1.2 to 1.8 GHz 25dB In-line Amplifier The TW126 by Tallysman Wireless is a low cost, rugged, waterproof, low noise, low power, 1.2 to 1.8 GHz band, 25dB gain in-line amplifier, specially designed to amplify all GNSS frequency signals, from GPS L2 to GLONASS L1.
	Tallysman TW141 1150 to 1750 MHz 40dB Inline Amplifier The TW141 by Tallysman Wireless is a rugged, waterproof wideband 40dB gain in-line amplifier, specially designed to boost weak frequency signals from 1150 to 1750 MHz, including L-Band and all GNSS (GPS, GLONASS and Galileo) signals.
	Tallysman TW142 1450 to 1750 MHz 40dB Inline Amplifier The TW142 by Tallysman Wireless is a rugged, waterproof, low noise, wideband 40dB gain inline amplifier, specially designed to boost weak frequency signals from 1450 to 1750 MHz, including L-Band, GPS L1 and GLONASS L1 signals.
Attenuators
	GPS Networking - ATTENDCB GPS Attenuator DC Block The XXATTENDCB GPS ATTENUATOR is designed specifically for the GPS L1/L2 and GLONASS carrier frequencies. The XXATTENDBC lowers the RF level of the GPS signal by the value of XX (dB) which is designated by the customer.
	GPS Networking - ATTENPDC GPS Attenuator Pass DC The XXATTENPDC GPS ATTENUATOR is designed specifically for the GPS L1/L2 and GLONASS carrier frequencies. The XXATTENPDC lowers the RF level of the GPS signal by the value of XX (dB) which is designated by the customer.
	GPS Networking - VATTENDCB GPS Variable Attenuator Blocks DC Voltage The VATTENDCB GPS ATTENUATOR is designed specifically for the GPS L1, L2 and GLONASS carrier frequencies.
	GPS Networking - VATTENPDC GPS Variable Attenuator The VATTENPDC GPS ATTENUATOR is designed specifically for the GPS L1, L2 and GLONASS carrier frequencies.
Combiners
	GPS Networking - CPCB2x1 GPS Combiner 2X1 - 2 Inputs - 1 Output The CPDC2X1 GPS antenna combiner is a two input one output power divider designed specifically for the GPS L1, L2 and GLONASS carrier frequencies.
	GPS Networking - CPDC4X1 GPS Combiner 4X1 - 4 Inputs - 1 Output The CPDC4X1 GPS antenna combiner is a four input one output power divider designed specifically for the GPS L1, L2 and GLONASS carrier frequencies. The CPDC2X1 allows you to put four antennas on one GPS receiver.
Filters
	GPS Networking - L1/L2FPDC L1/L2 GPS Filter (Pass DC) The L1L2FPDC is a GPS passband filter designed specifically for the GPS L1 and L2 carrier frequencies. The L1L2FPDC lowers the out of band noise and interference by 20dB. The DC voltage is then passed to the intended GPS antenna or source. All filters are available with N-type, SMA, BNC or TNC connectors.
	GPS Networking - L1FPDC L1 GPS Filter (Pass DC) The L1FPDC GPS passband filter is designed specifically for the GPS L1 carrier frequency. The L1FPDC lowers the out of band noise and interference by 20dB. The DC voltage is then passed to the intended GPS antenna or source. All filters are available with N-type, SMA, BNC or TNC connectors.
GPS Antenna Splitters
	GPS Networking - ALDCBS1X2 GPS Active Antenna Splitter 1X2 The ALDCBS1X2 GPS Amplified Splitter is a one input, two output device with a 20dB min. gain block. The frequency response covers the GPS L1, L2 and GLONASS bands with excellent gain flatness.
	GPS Networking - ALDCBS1X4 GPS Active Antenna Splitter 1X4 The ALDCBS1X4 GPS Amplified Splitter is a one input, four output device with a 17dB min. gain block. The frequency response covers the GPS L1, L2 and GLONASS bands with excellent gain flatness.
	GPS Networking - ALDCBS1X8 GPS Active Antenna Splitter 1X8 The ALDCBS1X8 GPS Amplified Splitter is a one input, eight output device with 13dB min. gain block. The frequency response covers GPS L1, L2 & GLONASS bands with excellent gain flatness.
	GPS Networking - LDCBS1X2 GPS Passive Antenna Splitter 1X2 The LDCBS1X2 GPS antenna splitter is a passive one input two output power divider designed specifically for the GPS L1, L2 & GLONASS carrier frequencies.
	GPS Networking - LDCBS1X4 GPS Passive Antenna Splitter 1X4 The LDCBS1X4 GPS antenna splitter is a passive one input four output power divider designed specifically for the GPS L1, L2 & GLONASS carrier frequencies.
	GPS Networking - LNFA1X4 GPS Active Antenna Splitter 1X4 The LNFA1X4 is a low noise, filtered, amplified 1X4 GPS antenna splitter that was originally designed to satisfy AT&T Wireless requirements.
	GPS Networking - MIL-NLDCBS1x3 GPS Passive Mil-Spec 1X3 Splitter The MIL-NLDCBS1X3 GPS antenna splitter is a one input three output power divider designed specifically for the GPS L1, L2 and GLONASS carrier frequencies.
	GPS Networking - RMALDCBS1X16 Rack Mount Amplified GPS Splitter 1X16 The RMHIALDCBS1X16 GPS Amplified Splitter is a one input - sixteen output device with 0.0dB gain each output in a rack mount chasis. The frequency response covers the GPS L1, L2 and GLONASS bands with excellent gain flatness.
	GPS Networking - RMALDCBS1X32 Rack Mount Amplified GPS Splitter 1X32 The RMALDCBS1X32 GPS Amplified Splitter is a one input - thirty-two output device with 0.0dB gain each output in a rack mount chasis. The frequency response covers the GPS L1, L2 and GLONASS bands with excellent gain flatness.
	GPS Networking - RMALDCBS1X8 Rack Mount Amplified GPS Splitter 1 X 8 The RMALDCBS1X8 GPS Amplified Splitter is a one input, eight output device in a Rack Mount Chassis. The frequency response covers the GPS L1 & L2 bands with excellent gain flatness.
	GPS Source MS12 GPS Splitter The MS12 is a military grade GPS splitter from GPS Source. It takes a GPS, GLONASS and Galileo L1/L2 signal and distributes it to two GPS/GNSS enabled devices. This allows two devices to share the same input, without the need of adding a second GPS antenna to the system.
	GPS Source MS14 GPS Splitter The MS14 is a military grade GPS splitter from GPS Source. It takes a GPS, GLONASS and Galileo L1/L2 signal and distributes the input signal to four GPS/GNSS enabled devices. This allows four GPS devices to share the same input, without the need of adding additional GPS antennas to the system.
	GPS Source MS18 GPS Splitter The MS18 is a military grade GPS splitter from GPS Source. It takes a GPS, GLONASS and Galileo L1/L2 signal and distributes the input signal to eight GPS/GNSS enabled devices. This allows eight GPS devices to share the same input, without the need of adding additional GPS antennas to the system.
	GPS Source S12T GPS Splitter The S12T is a small-sized GPS splitter from GPS Source. Despite its small size, the S12T offers high performance. It takes a GPS, GLONASS and Galileo L1/L2 signal and distributes it to two GPS/GNSS enabled devices.
	Tallysman TW150 L-Band/GNSS 1 to 2 Signal Splitter The TW150 by Tallysman Wireless is a professional grade 1 to 2 L-Band Signal Splitter, suitable for a wide range of L-Band and all GNSS applications.
	Tallysman TW151 DC Blocked L-Band/GNSS 1 to 2 Signal Splitter The TW151 by Tallysman Wireless is a professional grade DC blocked L-Band 1 to 2 Signal Splitter, suitable for a wide range of L-Band and all GNSS applications.
	Tallysman TW154 Regulated 0.5 to 3GHz, 3.3V Bias-Tee The TW154 by Tallysman Wireless is a professional grade wideband Bias-Tee for injecting DC voltages onto coaxial lines.
	Tallysman TW155 Regulated 0.5 to 3 GHz 5 V Bias-Tee The TW155 by Tallysman Wireless is a professional grade wideband Bias-Tee for injecting DC voltages onto coaxial lines.
Re-Radiating Kits
	GPS Networking - HNRRKIT Hangar Network Re-Radiating Kit The HNRRKIT is a complete re-radiating system to allow you to re-radiate the GPS L1 carrier signal indoors. The HNRRKIT consists of a Roof Antenna, a plug-in re-radiating amplifier & a re-radiating antenna.
	GPS Networking - L1/L2GPNRRKIT GPS L1/L2/L5 Galileo, GLONASS and Omnistar Portable Re-Radiating Kit The L1/L2GPNRRKIT is a portable network re-radiating kit that comes standard with a plug-in Re-radiating amplifier and a re-radiating antenna. It does not include an active L1/L2 roof antenna.
	GPS Networking - L1/L2HNRRKIT Hanger Re-Radiating Kit The L1/L2 HNRRKIT is a complete re-radiating system to allow you to re-radiate the GPS L1/L2 carrier indoors. The L1/L2HNRRKIT consists of a roof antenna, a plug-in re-radiating amplifier and a re-radiating antenna.
	GPS Networking - L1/L2VGHNRRKIT L1/L2 Re-Radiating Kit The L1/L2 VGHNRRKIT is a complete Re-radiating system to allow you to re-radiate the GPS L1/L2 carrier signal indoors and have the ability to increase or decrease the radiated range by adjusting the amplifier gain from -3 to 23 dB.
	GPS Networking - PNRRKIT L1 Portable Re-Radiating Kit The PNRRKIT is a Re-radiating system which allows you to re-radiate the GPS L1 carrier indoors. The PNRRKIT consists of a plug-in Re-Radiating amplifier and a Re-Radiating Antenna.
	GPS Networking - VGHNRRKIT GPS Variable Gain Hanger Re-Radiating Kit The VGHNRRKIT GPS Variable Gain Hanger Re-Radiating Kit from GPS Networking is a complete re-radiating system that allows re-radiation of the GPS L1 signal indoors.
	GPS Networking - VGPNRRKIT Portable L1 Re-Radiating Kit with Variable Gain The VGPNRRKIT is a re-radiating system which allows you to re-radiate the GPS L1 carrier indoors. The VGPNRRKIT consists of a plug-in re-radiating amplifier with vairable gain and a re-radiating Antenna.
	GPS Source GLI-ECHO II 1X1 The GPS Source GLI-ECHO II 1x1 is a primary system LRU for GPS retransmission. It is based on the advanced technology that was developed for permanent GPS retransmission in the Boeing C-17 and performs better than other higher priced retransmission systems.
	GPS Source GLI-ECHO II 1X4 Based on the advanced technology that was developed for Boeing C-17, the GPS Source GLI-ECHO II 1x4 is a primary system LRU for GPS retransmission. It performs better than other higher priced retransmission systems.
	Rojone ROJ-150A GPS L1/L2 Divider/Repeater The Rojone ROJ-150A is an advanced GPS repeater/distributor that is designed for Armoured Personnel Carrier (APC) applications. It can track GPS L1/L2/L5, GLONASS L1/L2, Galileo and Baidou frequency signals, and delivers accurate results.