Canal Geomatics

GPS Networking - GPS Antenna Splitters

All | GPS Antennas | Networking

Networking
GPS Antenna Splitters
	GPS Networking - ALDCBS1X2 GPS Active Antenna Splitter 1X2 The ALDCBS1X2 GPS Amplified Splitter is a one input, two output device with a 20dB min. gain block. The frequency response covers the GPS L1, L2 and GLONASS bands with excellent gain flatness.
	GPS Networking - ALDCBS1X4 GPS Active Antenna Splitter 1X4 The ALDCBS1X4 GPS Amplified Splitter is a one input, four output device with a 17dB min. gain block. The frequency response covers the GPS L1, L2 and GLONASS bands with excellent gain flatness.
	GPS Networking - ALDCBS1X8 GPS Active Antenna Splitter 1X8 The ALDCBS1X8 GPS Amplified Splitter is a one input, eight output device with 13dB min. gain block. The frequency response covers GPS L1, L2 & GLONASS bands with excellent gain flatness.
	GPS Networking - LDCBS1X2 GPS Passive Antenna Splitter 1X2 The LDCBS1X2 GPS antenna splitter is a passive one input two output power divider designed specifically for the GPS L1, L2 & GLONASS carrier frequencies.
	GPS Networking - LDCBS1X4 GPS Passive Antenna Splitter 1X4 The LDCBS1X4 GPS antenna splitter is a passive one input four output power divider designed specifically for the GPS L1, L2 & GLONASS carrier frequencies.
	GPS Networking - LNFA1X4 GPS Active Antenna Splitter 1X4 The LNFA1X4 is a low noise, filtered, amplified 1X4 GPS antenna splitter that was originally designed to satisfy AT&T Wireless requirements.
	GPS Networking - MIL-NLDCBS1x3 GPS Passive Mil-Spec 1X3 Splitter The MIL-NLDCBS1X3 GPS antenna splitter is a one input three output power divider designed specifically for the GPS L1, L2 and GLONASS carrier frequencies.
	GPS Networking - RMALDCBS1X16 Rack Mount Amplified GPS Splitter 1X16 The RMHIALDCBS1X16 GPS Amplified Splitter is a one input - sixteen output device with 0.0dB gain each output in a rack mount chasis. The frequency response covers the GPS L1, L2 and GLONASS bands with excellent gain flatness.
	GPS Networking - RMALDCBS1X32 Rack Mount Amplified GPS Splitter 1X32 The RMALDCBS1X32 GPS Amplified Splitter is a one input - thirty-two output device with 0.0dB gain each output in a rack mount chasis. The frequency response covers the GPS L1, L2 and GLONASS bands with excellent gain flatness.
	GPS Networking - RMALDCBS1X8 Rack Mount Amplified GPS Splitter 1 X 8 The RMALDCBS1X8 GPS Amplified Splitter is a one input, eight output device in a Rack Mount Chassis. The frequency response covers the GPS L1 & L2 bands with excellent gain flatness.